Magnetic Field Shielding Film YShield MCL61

$240.00 incl GST per linear metre.

The MCL61 film is highly effective at shielding low-frequency AC magnetic fields (30 dB attenuation or 97 %) and high-frequency fields (75 dB attenuation). Sold per linear metre; width is 61cm. 2-4 layers may be needed depending on the application.

The YShield magnetic film is made from a cobalt alloy specifically for shielding a low-frequency alternating magnetic field such as what you get from a meter box, switchboard, solar inverter, fridge, oven or electrical cable. However, it does also shield low-frequency AC electric fields and high-frequency fields.

Please click “Request a quote” for a shipping quote and delivery time frame. Best also to send photos of the inside and outside of your meter box so we can work out the best solution for your unique situation. A grounding kit ($5.34 inc GST for a pack of 2) is also required as well as installation/grounding by a licensed electrician.

Categories: , Tags: ,

Description

Cost: $240.00 incl GST per linear metre. Use the request a quote button below for a shipping cost. A grounding kit ($5.34 inc GST for a pack of 2) is also required as well as installation/grounding by a licensed electrician.

This MCL61 film is highly effective at shielding low-frequency AC magnetic fields (30 dB or 97% attenuation and high-frequency fields (75 dB attenuation). Sold per linear metre. Width: 61cm. Up to 2-4 layers may be needed depending on the application.

The YShield magnetic film is made from a cobalt alloy specifically for shielding a low-frequency alternating magnetic field such as what you get from a meter box, switchboard, solar inverter, fridge, oven or electrical cable. However, it does also shield low-frequency AC electric fields and high-frequency fields.

Because the cobalt strips are very fine and sharp the film is laminated for protection. It is also corrosion-resistant and can easily be cut using scissors.

Please click “Request a quote” for a shipping quote and delivery time frame. Best also to send me photos of the inside and outside of your meter box so we can work out the best solution for your unique situation.

Technical specifications

Width: 61 cm
Length: Sold by the meter
Attenuation LF magnetic field: 30 dB (97 %); The attenuation depends on the number of phases, cable twisting, the size of the area, etc. Can be used to shield cables with 1-2 sheets, fuse-boxes with 2-4 sheets
Attenuation HF: 75 dB
Material thickness 0.1mm
Weight: 265 g/m²
Colour: Silver
Permeability: µ 2 = 10,000; µ 4 = 25,000; µ max. = 100,000
Saturation polarization Bs: 0.55 T
Coercive field strength Hc: 0.5 A/m
Remanence Br/Bs: 0.7
Curie temperature Tc: 225 °C
Materials: Polyester, Co69, Fe4, Mo4, Nb1, Si16, B7
Application notes:

Warning: The cut edges are extremely sharp!
Important: It’s difficult to glue the film free of creases.
Yshield recommends covering the area with solid wall coverings.
Wall, ceiling, floor: Yshield recommend a high-viscous assembly adhesive, that adheres to non-absorbent substrates. Smooth the glue, lay the film, smooth with a pressure roller or squeegee.
The sheets of MCL61 should be overlapped.
It can be painted with any commercial synthetic dispersion paint.
The film is a water vapour barrier on wall areas.
Grounding
MCL61 is electrically isolated. To ground it, every strip has to be screwed with a chopper disk, that penetrates the polyester film. For this, you will also need a grounding kit – available in our shop.

All grounding must be done by a licensed electrician.

Shielding attenuation
The shielding attenuations are regularly tested in YShield’s own laboratory, HF due to ASTM D4935-10, the LF magnetic field due to ASTM A698/A698M-07. Please see the test report below.

Reviews

There are no reviews yet.

Be the first to review “Magnetic Field Shielding Film YShield MCL61”

Your email address will not be published. Required fields are marked *